Netgear WNDAP620 Manual Do Utilizador

Monitor Wireless Stations

The Wireless Stations screen contains the Available Wireless Stations table. This table shows 
all IP devices that are associated with the wireless access point in the wireless network that 
is defined by the wireless network name (SSID). The table heading indicates the wireless 
mode (802.11b, 802.11bg, or 802.11ng for the 2.4-GHz band, or 802.11a or 802.11na for the 
5-GHz band).

A wireless network can include multiple wireless access points, all 
using the same network name (SSID). This uniformity extends the 
reach of the wireless network and allows users to roam from one 
wireless access point to another, providing seamless network 
connectivity. Under these circumstances, be aware that the 
Available Wireless Stations table includes only the stations 
associated with this wireless access point.



Select Monitoring > Wireless Stations. The Wireless Stations screen displays:

DHCP Client

Enabled indicates that the current IP address was obtained from a DHCPv6 server on 
your LAN network. Disabled indicates a static IP configuration.

Current Wireless Settings for 802.11b, 802.11g, or 802.11ng

or

Current Wireless Settings for 802.11a or 802.11na

The section heading depends on the configured wireless mode.

Access Point Mode

The operating mode of the wireless access point. One of the following modes is 
indicated:

•

Access Point

•

Point-to-Point Bridge

•

Point-to-Point Bridge with Access Point

•

Multi-Point Bridge with/without client association

For information about how to change the mode, see 

Channel / Frequency

The channel that the wireless port is using. For information about how to change the 
channel and frequency, see 

on page 28 

and 

Rogue AP Detection

Enabled indicates that rogue AP detection is enabled. Disabled indicates that it is not.