Netgear DGND3300 Manual Do Utilizador

Customizing Your Network Settings

5-17

•

When the modem router is in dual band mode (the Mode field on the Wireless Settings screen 
is set to Up to 270 Mbps at 5 GHz and 54 Mbps at 2.4 GHz), the WDS function works only 
in 5GHz 11N mode. To use the 2.4GHz 11g protocol with WDS, set the Mode field in the 
Wireless Settings screen to Up to 270 Mbps at 2.4 GHz. If you make changes in the Wireless 
Settings screen, click Apply so that they take effect.

You can view or change wireless repeater settings for the modem router. From the main menu of 
the browser interface, under Advanced, click Wireless Repeating Function to display the 
Wireless Repeating Function screen.

The modem router supports two modes of the wireless repeating function, and allows you to 
control wireless client association:

•

Wireless Repeater. The modem router sends all traffic from its local wireless or wired 
computers to a remote AP. To configure this mode, you must know the MAC address of the 
remote parent AP. 

•

Wireless Base Station. The modem router acts as the parent AP, bridging traffic to and from 
the child repeater AP, as well as handling wireless and wired local computers. To configure 
this mode, you must know the MAC addresses of the child repeater AP.

•

Disable Wireless Client Association. Usually this check box is cleared so that the modem 
router is an access point for wireless computers.