Netgear WNR834Bv2 Manual Do Utilizador
Default Configuration
35
Default Configuration
Default Configuration Settings
You can use the Restore Factory Settings button located on the back of your device to reset all
configuration settings to their factory defaults. This is called a hard reset.
configuration settings to their factory defaults. This is called a hard reset.
•
To perform a hard reset, push and hold the Restore button for approximately 5 seconds (until
the POWER LED blinks rapidly). Your device will return to the factory configuration settings
shown in
the POWER LED blinks rapidly). Your device will return to the factory configuration settings
shown in
Table 1
below.
•
Pressing the Restore button for a shorter period of time will simply cause your device to
reboot.
reboot.
Table 1.
Home Router Default Configuration Settings
Feature
Default Setting
Smart Wizard
Disabled
Router Login
Router Login URL
http://www. routerlogin.net;
http://www.routerlogin.com; or http://192.168.1.1
http://www.routerlogin.com; or http://192.168.1.1
Login Name (case sensitive)
admin
Login Password (case sensitive)
password
Internet Connection
WAN MAC Address
Default hardware address (on label)
MTU Size
1500
Local Network
Router Lan IP address (the Gateway IP
address)
address)
192.168.1.1
IP Subnet Mask
255.255.255.0
DHCP Server
Enabled
Time Zone
GMT