Netgear VPN Firewall 200 FVX538 Manual Do Utilizador
ProSafe VPN Firewall 200 FVX538 Reference Manual
6-16
Router and Network Management
v1.0, August 2006
To upgrade router software:
1. Select Administration from the main menu and Settings Backup and Firmware Upgrade
from the submenu. The Settings Backup and Firmware Upgrade screen will display.
2. Click Browse in the Router Upgrade section.
3. Locate the downloaded file and click Upload. This will start the software upgrade to your
VPN firewall router. This may take some time. At the conclusion of the upgrade, your router
will reboot.
will reboot.
4. After the VPN firewall has rebooted, select Monitoring and confirm the new firmware
version to verify that your router now has the new software installed.
Setting the Time Zone
Date, time and NTP Server designations can be input on the Time Zone screen. Network Time
Protocol (NTP) is a protocol that is used to synchronize computer clock times in a network of
computers Select Administration from the main menu and Time Zone from the submenu. The
Time Zone screen will display.
Protocol (NTP) is a protocol that is used to synchronize computer clock times in a network of
computers Select Administration from the main menu and Time Zone from the submenu. The
Time Zone screen will display.
To set Time, Date and NTP servers:
1. From the Date/Time pull-down menu, select the Local Time Zone. This is required in order
for scheduling to work correctly. The VPN firewall includes a Real-Time Clock (RTC), which
it uses for scheduling.
it uses for scheduling.
2. If supported in your region, check the Automatically Adjust for Daylight Savings Time
radio box.
3. Select a NTP Server option by checking one of the following radio boxes:
•
Use Default NTP Servers: If this is enabled, then the RTC (Real-Time Clock) is updated
regularly by contacting a Default Netgear NTP Server on the Internet.
regularly by contacting a Default Netgear NTP Server on the Internet.
Warning: Do not try to go online, turn off the router, shutdown the computer or do
anything else to the router until the router finishes the upgrade! When the
Test light turns off, wait a few more seconds before doing anything.
Test light turns off, wait a few more seconds before doing anything.
Note: In some cases, such as a major upgrade, it may be necessary to erase the
configuration and manually reconfigure your router after upgrading it. Refer to
the Release Notes included with the software to find out if this is required.
the Release Notes included with the software to find out if this is required.