Netgear D6200 Manual Do Utilizador

Página de 156
Advanced Settings 
108
D6200 WiFi DSL Modem Router 
The D6200 WiFi DSL modem router is always in dual-band concurrent mode, unless you turn 
off one radio. If you enable the wireless repeater in either radio band, the wireless base 
station or wireless repeater cannot be enabled in the other radio band. However, if you 
enable the wireless base station in either radio band and use the other radio band as a 
wireless WiFi DSL modem router or wireless base station, dual-band concurrent mode is not 
affected.
For you to set up a wireless network with WDS, 
t
he following conditions have to be met for 
both access points:
Both access points have to use the same SSID, wireless channel, and encryption mode.
Both access points have to be on the same LAN IP subnet. That is, all the access point 
LAN IP addresses are in the same network.
All LAN devices (wired and wireless computers) have to be configured to operate in the 
same LAN network address range as the access points.
Wireless Repeating Function
Use the Wireless Repeating Function screen to view or change the wireless repeater 
settings.
To view or change the wireless repeater settings:
1. 
Select ADVANCED > Advanced Setup > Wireless Repeating Function.
2. 
Configure the following settings:
Enable Wireless Repeating Function. Select the check box for the 2.4
 
GHz or 5 
GHz network to use the wireless repeating function.