Netgear D6100 Manual Do Utilizador

Click the Apply button.

Your settings are saved.

Click the Test button to test your Internet connection. 

If you want to use an IPv6 Internet connection, you must specify the settings manually. 
NETGEAR genie does not detect an IPv6 Internet connection automatically. 

The modem router can support an IPv6 Internet connection through the following connection 
types:

Auto Detect. For more information, see 

57.

Auto Config. For more information, see 

59.

6to4 tunnel. For more information, see 

61.

Get Dynamically from ISP

Your ISP uses DHCP to assign your IP address. Your ISP automatically 
assigns these addresses.

Use Static IP Address

Enter the IP address, IP subnet mask, and gateway IP address that your 
ISP assigned. The gateway is the ISP modem router to which your modem 
router connects.

The DNS server is used to look up site addresses based on their names. 

Get Automatically from ISP

Your ISP uses DHCP to assign your DNS servers. Your ISP automatically 
assigns this address.

Use These DNS Servers

If you know that your ISP does not automatically transmit DNS addresses 
to the modem router during login, select this option and enter the IP 
address of your ISP primary DNS server. If a secondary DNS server 
address is available, enter it also.

NAT allows computers on your home network to share the modem router Internet connection. NAT is 
enabled by default because it is needed in most situations. Select the NAT setting:

Enable. NAT is enabled. This is the default setting.

Disable. NAT is disabled.