Nortel Networks 2700 Manual Do Utilizador
70
Chapter 4 Installing option cards and DIMMs
NN46110-311 02.01
Installing and replacing DIMMs
The VPN Router 2700 has two slots for dual inline memory modules (DIMMs)
(
(
). Unless you ordered additional memory, Nortelships the
VPN Router 2700 with one 256 MB DIMM installed. You can upgrade memory
in the gateway by installing a second 256 MB DIMM.
in the gateway by installing a second 256 MB DIMM.
This section provides instructions on adding a second DIMM to the VPN Router
2700 or, if necessary, replacing an existing DIMM.
2700 or, if necessary, replacing an existing DIMM.
To install or replace a DIMM:
1
Shut down the VPN Router 2700 using the Web GUI or the CLI, and then
unplug it as described in
unplug it as described in
2
Remove the front bezel from the chassis, and then remove the chassis from
the equipment rack (see
the equipment rack (see
3
Remove the top cover from the chassis (see
Caution: Use of a memory module not purchased from Nortel can
render void your warranty or your service contract.
render void your warranty or your service contract.
Caution: Install the same type of DIMM that is already installed in the
gateway. For example, do not install a 128 MB DIMM in the VPN
Router 2700.
gateway. For example, do not install a 128 MB DIMM in the VPN
Router 2700.
Warning:
Risk of electric shock
Turn off the VPN Router 2700 and unplug it before you attempt to install
a DIMM.
a DIMM.