Nortel Networks 1005r Manual Do Utilizador
Replacing basic chassis components
Standard 1.10
108
CallPilot
Removing and replacing the server cover
Remove the server cover if you must service the interior of the server.
Note: If a component has a:
To remove the server cover
1
Power down the server, unplug all peripheral devices and Ethernet
cables, and disconnect the AC power.
cables, and disconnect the AC power.
2
Turn off all peripheral devices connected to the server.
3
Attach the ESD strap to your wrist and attach the other end to a
known grounded connection.
known grounded connection.
4
While holding the blue button at the top of the chassis in, slide the
top cover back until it stops.
top cover back until it stops.
Blue tab
Power down the server before replacing it.
Green tab
It can be replaced while the server is powered on.
Black tab
It is non-replaceable, or not important.
.
DANGER
Risk of electric shock
High current inside the chassis can cause severe injury.
.
CAUTION
Risk of equipment damage
Take precautions to protect internal components. Electrostatic
discharge (ESD) can damage boards and make them unusable.
discharge (ESD) can damage boards and make them unusable.