3com MSR 20 Manual Do Utilizador
FIC-IMA-4T1/FIC-IMA-8T1
215
Step 4: Power on the router. Check the behavior of the LINK LED for the slot on
the card panel: OFF means the line has problem and signal is out of
synchronization. Check the link status.
the card panel: OFF means the line has problem and signal is out of
synchronization. Check the link status.
FIC-IMA-4T1/FIC-IMA-8
T1
T1
Introduction
The 4-port/8-port T1 ATM inverse multiplexing interface card
(FIC-IMA-4T1/FIC-IMA-8T1) provides four/eight T1 interfaces that support the IMA
technology. Their network application is similar to that of the
FIC-IMA-4E1/FIC-IMA-8E1 card.
(FIC-IMA-4T1/FIC-IMA-8T1) provides four/eight T1 interfaces that support the IMA
technology. Their network application is similar to that of the
FIC-IMA-4E1/FIC-IMA-8E1 card.
Interface Attributes
The following table describes the interface attributes of the
FIC-IMA-4T1/FIC-IMA-8T1:
FIC-IMA-4T1/FIC-IMA-8T1:
Interface LEDs
The following figures illustrate the FIC-IMA-4T1 and FIC-IMA-8T1 panels:
Figure 263 FIC-IMA-4T1 panel
Table 159 Interface attributes of the FIC-IMA-4T1/FIC-IMA-8T1
Attribute
Description
FIC-IMA-4T1
FIC-IMA-8T1
Connector DB-68
Number of
connectors
connectors
1
Interface standard
ITU-G.703, ITU-G.704
Cable type
4T1 conversion cable
(100-ohm
straight-through
shielded)
(100-ohm
straight-through
shielded)
8T1 conversion cable (100-ohm
straight-through shielded)
straight-through shielded)
Max transmission
distance
distance
150 m (492.1 ft.)
Operating mode
ATM T1 independent link/IMA bundle mode
Supported service
AAL5
Protocol
PPPoA, PPPoEoA, IPoA, IPoEoA
Transmission rate
CBR/VBR-rt/VBR-nrt/UBR