Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Siemens
  4. S223
  5. Manual Do Utilizador

Siemens S223 Manual Do Utilizador

Download
Página de 381
User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 
A50010-Y3-C150-2-7619                                                                         95 
The following is the basic information to operate ping test. 
Items Description 
Protocol [ip] 
Supports ping test. Default is IP. 
Target IP address 
Sends ICMP echo message by inputting IP address or host name of 
destination in order to check network status with relative. 
Repeat count [5] 
Sends ICMP echo message as many as count. Default is 5. 
Datagram size [100] 
Ping packet size. Default is 100 bytes. 
Timeout in seconds [2] 
It is considered as successful ping test if reply returns within the con-
figured time interval. Default is 2 seconds. 
Extended commands [n] 
Shows the additional commands. Default is no. 
Tab. 6.2 
Options for Ping 
 
The following is an example of ping test 5 times to verify network status with IP address 
172.16.1.254. 
SWITCH# ping 
Protocol [ip]: ip 
Target IP address: 172.16.1.254 
Repeat count [5]: 5 
Datagram size [100]: 100 
Timeout in seconds [2]: 2 
Extended commands [n]: n 
PING 172.16.1.254 (172.16.1.254) 100(128) bytes of data. 
Warning: time of day goes back (-394us), taking countermeasures. 
108 bytes from 172.16.1.254: icmp_seq=1 ttl=255 time=0.058 ms 
108 bytes from 172.16.1.254: icmp_seq=2 ttl=255 time=0.400 ms 
108 bytes from 172.16.1.254: icmp_seq=3 ttl=255 time=0.403 ms 
108 bytes from 172.16.1.254: icmp_seq=4 ttl=255 time=1.63 ms 
108 bytes from 172.16.1.254: icmp_seq=5 ttl=255 time=0.414 ms 
--- 172.16.1.254 ping statistics --- 
5 packets transmitted, 5 received, 0% packet loss, time 8008ms 
rtt min/avg/max/mdev = 0.058/0.581/1.632/0.542 ms 
SWITCH# 
 
When multiple IP addresses are assigned to the switch, sometimes you need to verify the 
connection status between the specific IP address and network status. 
In this case, use the same process as ping test and then input the followings after ex-
tended commands. It is possible to verify the connection between specific IP address and 
network using the following command.