Siemens MC35 Manual Do Utilizador
AT Command Set
MC35_ATC_01_V04.00
Page 21 of 238
02.04.2002
2.9 ATDI Mobile originated call to dialable ISDN number <n>
Execute command
ATDI<n>[;]
TA attempts to set up an outgoing call to ISDN number.
Note:
This command may be aborted generally by receiving a character during
execution. This command cannot be aborted in some connection setup
states, such as handshaking.
execution. This command cannot be aborted in some connection setup
states, such as handshaking.
Response
If no dialtone (parameter setting ATX2 or ATX4):
NO DIALTONE
NO DIALTONE
If busy (parameter setting ATX3 or ATX4):
BUSY
BUSY
If a connection cannot be set up:
NO CARRIER
NO CARRIER
If successful connected and non-voice call:
CONNECT<text> TA switches to data state.
CONNECT<text> TA switches to data state.
Note:
<text> output only if +ATX parameter setting with value > 0.
When TA returns to command mode after call release:
OK
OK
If successfully connected and voice call:
OK
OK
Parameter
<n>
[+]<d>
phone number
string with maximum length of 20 characters
+
international dialling format
<d>
ISDN number
string of digits: +,0-9, A, B, C
string of digits: +,0-9, A, B, C
<;>
voice call
Reference
V.25ter