EnGenius Technologies 1.2 Manual Do Utilizador
24
Enable IPsec pass through on VPN connection: Place a check in this box to
enable the pass through of PPTP packets on a VPN connection.
enable the pass through of PPTP packets on a VPN connection.
Enable IPsec pass through on VPN connection: Place a check in this box to
enable the pass through of L2TP packets on a VPN connection.
enable the pass through of L2TP packets on a VPN connection.
Click on the Apply Changesto save the changes.
WAN Settings – DHCP Client
Click on the WAN link on the navigation drop-down menu. This feature allows you to
configure the WAN interface using a static IP address, DHCP Client, PPoE, or PPTP.
The DHCP Client feature allows the ISP to provide an IP address to the device. This
is also known as Dynamic IP.
The DHCP Client feature allows the ISP to provide an IP address to the device. This
is also known as Dynamic IP.
WAN Access Type: Select DHCP Client from the drop-down list. This type of
connection is usually used when the ISP will supply the IP address and DNS settings.
This is also known as Dynamic IP.
connection is usually used when the ISP will supply the IP address and DNS settings.
This is also known as Dynamic IP.
Host Name: Specify a host name for this device.
DNS: The ISP usually automatically assigns the DNS IP address, in case you need
to assign it manually then click on the Set DNS Manually and fill in the fields.
to assign it manually then click on the Set DNS Manually and fill in the fields.
MTU: You may adjust the Maximum Transmit Unit (MTU), however it is recommend
that this value is set to the default: 1500 bytes
that this value is set to the default: 1500 bytes
DNS 1-3: Specify the IP address of the DNS server
Clone MAC Address: Specify a MAC address if you would like to use a different
MAC address on this device. (optional)
MAC address on this device. (optional)