EnGenius Technologies 1.2 Manual Do Utilizador
28
Wireless
Click on the TCP/IP Settings link on the
navigation drop-down menu. You will then
see five options. Basic Settings, Advanced
Settings, Security, Access Control, and
WDS Settings. Each option is described
below.
see five options. Basic Settings, Advanced
Settings, Security, Access Control, and
WDS Settings. Each option is described
below.
Wireless Basic Settings
Click on the Basic Settings link on the navigation drop-down menu. These options
allow you to enable/disable the wireless interface, switch between the 11b/g and 11b
radio band and channel frequency
radio band and channel frequency
Wireless Interface: Place a check in this box to disable the wireless interface, it is
enabled by default.
enabled by default.
Band: Select the IEEE 802.11 mode from the drop-down list. For example, if you are
sure that the wireless network will be using only IEEE 802.11g clients, then it is
recommended to select 802.11g only instead of 2.4 GHz B+G which will reduce the
performance of the wireless network. You may also select 2.4GHz B or 2.4GHz G
sure that the wireless network will be using only IEEE 802.11g clients, then it is
recommended to select 802.11g only instead of 2.4 GHz B+G which will reduce the
performance of the wireless network. You may also select 2.4GHz B or 2.4GHz G
SSID: The SSID is a unique named shared amongst all the points of the wireless
network. The SSID must be identical on all points of the wireless network and cannot
exceed 32 characters.
network. The SSID must be identical on all points of the wireless network and cannot
exceed 32 characters.
Channel: Select a channel from the drop-down list. The channels available are
based on the country’s regulation.
based on the country’s regulation.