Enterasys Networks 1G58x-09 Manual Do Utilizador
SNMP Command Set
Configuring SNMP Users, Groups and Communities
5-16
5.2.2.2
set snmp user
Use this command to create a new SNMPv3 user.
set snmp user user [authentication md5 [privacy]] [remote remoteid] [volatile |
nonvolatile]
nonvolatile]
Syntax Description
Command Defaults
•
If authentication is not specified, no authentication will be applied.
•
If privacy is not specified, no encryption will be applied.
Table 5-4
show snmp user Output Details
Output
What It Displays...
EngineId
SNMP local engine identifier.
Username
SNMPv1 or v2 community name or SNMPv3 user
name.
name.
Auth protocol
Type of authentication protocol applied to this
user.
user.
Privacy protocol
Whether a privacy protocol is applied when
authentication protocol is in use.
authentication protocol is in use.
Storage Type
Whether access entries for this group are stored in
volatile, nonvolatile or read-only memory.
volatile, nonvolatile or read-only memory.
Row status
Status of this entry: active, notInService, or
notReady.
notReady.
user
Specifies a name for the SNMPv3 user.
authentication md5 (Optional) Specifies the authentication type required for
this user as MD5.
privacy
(Optional) Applies DES encryption.
remote remoteid
(Optional) Registers the user on a specific remote SNMP
engine.
engine.
volatile |
nonvolatile
nonvolatile
(Optional) Specifies a storage type for this user entry.