Dynalink RTA1025W Manual Do Utilizador
Appendix B: Client Setup for 802.1x, WPA, and WPA-PSK
143
Enabling WPA Authentication and Security
The first four steps are the same
as the setting for 802.1x
authentication, please refer to
the previous part.
as the setting for 802.1x
authentication, please refer to
the previous part.
5. Select
the
Association Tab,
and enter the SSID of the AP.
(e.g., Please)
(e.g., Please)
6. Choose
WPA from the drop
down menu for the Network
Authentication, and TKIP for
Data encryption.
Authentication, and TKIP for
Data encryption.
7. Click
OK, and then select the
Authentication Tab.
8. The
Enable network access
control using IEEE 802.1X is
selected by default, and
Protected EAP (PEAP) is
selected from the EAP type.
selected by default, and
Protected EAP (PEAP) is
selected from the EAP type.
9. Click
Properties under EAP
type.