Dynalink RTA1025W Manual Do Utilizador
Chapter 3: Accessing the Internet
59
6.
On the Configure LAN side Settings page, key in the information for your
LAN, e.g.,
Primary IP Address: 192.168.1.1
Subnet mask: 255.255.255.0
Start IP Address: 192.168.1.2
End IP Address: 192.168.1.254
LAN, e.g.,
Primary IP Address: 192.168.1.1
Subnet mask: 255.255.255.0
Start IP Address: 192.168.1.2
End IP Address: 192.168.1.254
7.
Check the network information. Make sure the settings match the settings
provided by ISP. Click Finish.
provided by ISP. Click Finish.
8.
Now the router is well configured. You can access into Internet.