Roberts Gorden CTH2-40 CTH2-60 Manual Do Utilizador

13

To ensure your safety, and comply with the terms of 
the warranty, all units must be installed in accor-
dance with these instructions.

The gas or the electrical supply lines must not be

used to support the heater.

Do not locate the gas or electric supply lines directly 
over the path of the flue products from the heater.

The heater must be installed in a location that is 
readily accessible for servicing.

The heaters must be installed in accordance with 
clearances to combustibles as indicated on the rating 
plate and in this instruction manual.

The minimum and maximum gas inlet pressures 
must be maintained as indicated on the rating plate.

Typical installation configurations are shown in 
Figure 14.
Expansion and contraction of the tube dictates that 
the minimum suspension lengths in the table 

Page 14, Figure 14 be maintained.