Verizon GT701C Manual Do Utilizador
60
DSL Modem User Manual
61
Chapter 8 Troubleshooting
s
If running Windows 98
SE
or Me, check the computer’s
TCP/IP
settings. Select
Start, Run, enter
winipcfg
in the “Open” text box, then press
OK
. The “
IP
Configuration” window appears.
Ensure the text box at the top of the window contains the name of the Ethernet
adapter installed in the computer. If not, click on the down arrow next to the
text box. When the list appears, click on the proper Ethernet adapter.
In the fields below, the Ethernet adapter’s various addresses appear. There
should be an entry for
adapter installed in the computer. If not, click on the down arrow next to the
text box. When the list appears, click on the proper Ethernet adapter.
In the fields below, the Ethernet adapter’s various addresses appear. There
should be an entry for
IP
address, Subnet Mask, and Default Gateway.
Additionally, the “
IP
Address” entry should be on the 192.168.1.x network
(with “x” defining a range from 64 though 254).
If the Ethernet adapter is showing an incorrect
If the Ethernet adapter is showing an incorrect
IP
address, click Release, which
sets all values back to
0
(zero). Then, click Renew (this process may take a few
seconds). The renewed IP address should be on the 192.168.1.x network.
If an error occurs, or the IP address renews with an address outside the
192.168.1.x network, contact the
If an error occurs, or the IP address renews with an address outside the
192.168.1.x network, contact the
ISP
immediately.
s
If running Windows 98
SE
, Me, 2000, or
XP
, check the computer’s
TCP/
IP
settings. Select Start, Run, enter
CMD
in the “Open” text box, then press OK. A “
DOS
” window appears, with a blink-
ing cursor (prompt). Enter
ipconfig
at the cursor, then press Enter on the keyboard.
The
The
IP
address of the Ethernet adapter should appear in the
DOS
window.
Ensure the
IP
address in the 192.168.1.x network (with “x” defining a range
from 64 though 254).
If the Ethernet adapter is showing an incorrect
If the Ethernet adapter is showing an incorrect
IP
address, enter
ipconfig /release
at the cursor, then press Enter on the keyboard, which sets all values back to
0 (zero). Next, enter
0 (zero). Next, enter
ipconfig /renew
at the cursor, then press Enter on the keyboard (this process may take a few
seconds). The renewed
seconds). The renewed
IP
address should be on the 192.168.1.x network.
If an error occurs, or the
IP
address renews with an address outside the
192.168.1.x network, contact the
ISP
immediately