Verizon MBR1515L Manual Do Utilizador

Wireless Placement and Range Guidelines

The range of your wireless connection can vary based on the physical placement of the 
router. The latency, data throughput performance, and notebook power consumption of 
wireless adapters also vary depending on your configuration choices.

For best results, place your router according to the following guidelines:

Near the center of the area in which your computers operate.

In an elevated location, such as a high shelf, where the wirelessly connected computers 
have line-of-sight access (even if through walls).

Away from sources of interference, such as microwave ovens, and 2.4 GHz cordless 
phones (see 

on page 112).

Away from large metal surfaces.

Place the router in the vertical position for the best coverage (as an example, see the 
image in 

on page 14).

If using multiple access points, it is better if adjacent access points use different radio 
frequency channels to reduce interference. The recommended channel spacing between 
adjacent access points is 5 channels (for example, use Channels 1 and 6, or 6 and 11).

The time it takes to establish a wireless connection can vary depending on both your security 
settings and placement. WEP connections can take slightly longer to establish. Also, WEP 
encryption can consume more battery power on a notebook computer.

Wireless Security Options

Indoors, computers can connect over Wi-Fi networks at a maximum range of up to 300 feet 
(100 meters). Such distances can allow others outside your immediate area to access your 
network. 

Unlike wired network data, your wireless data transmissions extend beyond your walls and 
can be received by anyone with a compatible adapter. For this reason, use the security 
features of your wireless equipment. The Verizon 4G LTE Router provides highly effective 
security features, which are covered in detail in this chapter. Deploy the security features 
appropriate to your needs.

Each router is preconfigured for WPA-PSK/WPA2-PSK mixed mode, and comes with a 
unique SSID and passphrase for each router.

Here are several ways you can enhance the security of your wireless network:

Restrict access based on MAC address. You can allow only trusted computers to 
connect so that unknown computers cannot wirelessly connect to the router. Restricting 
access by MAC address adds an obstacle against unwanted access to your network, but 
the data broadcast over the wireless link is fully exposed. 

Turn off the broadcast of the wireless network name (SSID). If you disable broadcast 
of the SSID, only devices that have the correct SSID can connect. This approach nullifies 
wireless network “discovery” feature of some products, such as Windows XP, but the data 
is still exposed.