Verizon MBR1515L Manual Do Utilizador

Click Next and select the PIN Number radio button. The following screen displays.

Go to the client wireless computer. Run a WPS configuration utility. Follow the utility’s 
instructions to generate a PIN. Take note of the client PIN.

In the router Add WPS Client screen, enter the client PIN number and click Next.

The router tries to communicate with the client for 4 minutes. If no WPS clients 
connect during this time, the router wireless settings do not change.

The router WPS screen confirms that the client was added to the wireless network. 
The router generates an SSID and implements WPA/WPA2 wireless security. 

Note the new SSID and WPA/WPA2 password for the wireless network. You can view these 
settings in the Wi-Fi Settings screen. See 

To access the Internet from any computer connected to your router, launch an Internet 
browser. You should see the router’s Internet Port LED blink.

Add Wireless Computers That Do Not Support WPS

If you set up your network with WPS, and now you want to add a computer that does not 
support WPS, you must manually configure that computer. For information about how to view 
the wireless settings for the router, see 

Because WPA randomly creates the SSID and WPA/WPA2 keys, they might be difficult to 
type or remember (that is one reason why the network is so secure). You can change the 
wireless settings so that they are easier for you to remember. When you do that, you have to 
set up the WPS-compatible computers again.

When you make these changes, all wireless computers and devices 
disconnect from network. You then have to set them up with the new 
wireless settings.



Use an Ethernet cable to connect a computer to the router. That way you do not get 
disconnected when you change the wireless settings.