TP-LINK TL-WA830RE Manual Do Utilizador

 

 

Figure 1-2 

Viewed from left to right, the following parts are located on the rear panel of TL-WA830RE. 

Wireless antenna：The external antenna is used to transmit and receive wireless data.   

POWER: The power port connects to the power adapter provided with the TL-WA830RE 300Mbps 
Wireless N Range Extender. 

LAN: One LAN 10/100Mbps RJ45 port connects to a network device, such as a switch or a router. 

RESET: The Reset button is used to restore the AP’s factory default settings. There are two ways 
to reset the Access Point’s factory defaults:   

z

 

Method one: With the AP powered on, use a pin to press and hold the Reset button (about 5 

seconds) until the System LED becomes quick-flash from slow-flash. And then release the 
button and wait the AP to reboot to its factory default settings.   

z

 

Method two: Restore the default settings from “System Tools > Factory Defaults” of the 

AP's Web-based management page. 

)

Ensure the AP is powered on before it restarts completely. 

3