TP-LINK TD-W8901N Manual Do Utilizador

 

37 

 

Figure 4-20 



  WPS Settings: WPS can help you to add a new wireless device to an existing network 

quickly. This section will guide you how to use WPS function. 
 

WPS state: Display the current WPS state. 

 

WPS mode: If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can 
establish a wireless connection between wireless adapter and Router using either Push 
Button Configuration (PBC) method or PIN method, please select the one you want. 

 

WPS progress: Show the current WPS progress. 

 

Reset to OOB: Use this button to reset the WPS state to “unconfigured”, so that a new 
key will be created when using WPS function next time. 

If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration 

(PBC) method, you can add it to the network by PBC with the following two methods. Click 

PBC, you will see the screen as shown below. 

 

Figure 4-21 

Step 1:  Click Start WPS button in Figure 4-21. 

Step 2:  Press and hold the WPS button of the adapter directly for 2 or 3 seconds. 

 

Step 3:  Wait for a while until the next screen appears. Click Finish to complete the WPS 

configuration.