Toshiba M20 Manual Do Utilizador

25

RG 5.375 x 8.375 ver 2.3.3

When you connect the AC adapter to the computer, always follow the 
steps in the exact order as described in the User's Manual. 
Connecting the power cable to a live electrical outlet should be the 
last step; otherwise, the adapter DC output plug could hold an 
electrical charge and cause an electrical shock or minor bodily injury 
when touched. As a general safety precaution, avoid touching any 
metal parts.

Hold the power cable by its plug when you connect/disconnect it. Do 
NOT pull the cable itself. Doing so may damage the power cable and 
result in a short circuit or electric shock.

Handling the cord on this product will expose you to lead, a 
chemical known to the State of California to cause birth defects or 
other reproductive harm. Wash hands after handling.

Before you can connect a printer, you need to know whether 
it uses a serial or a parallel interface. Check the printer’s 
documentation. If the printer can be switched between serial 
and parallel mode, choose parallel because it is faster. 

You also need a suitable printer cable, which may come with 
your printer. Otherwise, you can purchase one from a 
computer or electronics store.

If your printer is ECP- or IEEE-compliant, make sure your printer 
cable is an IEEE 1284 cable.

Before you install or remove a memory module, turn off the computer 
using the Start menu. If you install or remove a memory module 
while the computer is in Standby or Hibernation mode, data will be 
lost.

AC adapter

Power cable