TP-LINK AC1750 Manual Do Utilizador

21

Chapter 5

Bandwidth Control

1 ) 

IP Range:

 Enter the IP address. The field can be single IP 

address or IP address range according to your demands. 
When you configure the single IP address, the computer 
with this IP address will get independent given 
bandwidth. When you configure the IP address range, all 
computers in the range will share the given bandwidth.

2 ) 

Port Range:

 Keep the default settings. The default port 

range of TCP protocol or UDP protocol is from 1 to 65535.

3 ) 

Protocol:

 Keep the default setting. Or you can choose the 

TCP protocol or UDP protocol or both of them.

4 ) 

Priority:

 Keep the default setting. You can change the 

value if you want to first guarantee the bandwidth for 
one computer. The smaller value has the higher priority.

5 ) 

Upstream/Downstream:

 Enter the bandwidth according 

to your division.

6 )  Check to enable this entry and click

 OK

 to save the 

settings.

6   Follow the steps above to add a rule for the other computer. 

And then you will get the following table.