Avaya G250 Manual Do Utilizador

To delete a Frame Relay sub-interface:

1. Click the Frame Relay sub-interface you want to delete.

Note:

You can only delete Frame Relay sub-interfaces on which no IP interfaces are 
defined.

2. Click Delete. 

3. Click Apply. The Frame Relay sub-interface is deleted.

The following table provides a list of the fields in the Frame Relay sub-interfaces tab of the 
Channel Group dialog box and their descriptions.

The name of the interface.

A user defined description of the Sub-Frame-Relay.

The type of Frame Relay sub-interface. Currently, only Point to Point 
interfaces are supported.

The bandwidth of the Frame Relay sub-interface in bits per second.

The administrative status of the interface. Possible statuses include:

●

●

The operational status of the Frame Relay sub-interface. Possible 
statuses include:

●

Up - The interface is up and can transmit and receive packets.

●

Down - The interface is down due to some failure, and cannot 
transmit or receive packets.

●

Testing - The interface is in testing mode and cannot transmit 
or receive regular data.

●

Standby - The interface is a backup interface and cannot 
transmit or receive packets unless the primary interface it 
backs up fails.

●

Disabled - The interface is disabled. It cannot transmit or 
receive packets.

●

Partially Down - The interface is up. However, some 
interfaces (or PVCs) layered on top of this interface are Down. 
Some packets can be transmitted and received.

A list of all DLCIs associated with the Sub-Frame-Relay interface. 
If more than one DLCI is configured on the Sub-Frame-Relay 
interface, priority DLCI is active. The first DLCI is for high priority 
traffic, the second DLCI is for medium priority traffic, etc.