Avaya G250 Manual Do Utilizador

The following table provides a list of the fields in the DLCIs tab of the Channel Group dialog box 
and their descriptions:

To configure the priority of DLCI traffic, select the checkboxes for the priorities to use on the 
DLCI. 

If only one DLCI is configured for the Channel Group, all traffic uses the DLCI. 

If more than one DLCI is configured on the Channel Group, the priorities must be distributed 
among the DLCIs, and no priority can be configured on more than one DLCI. For example, if 
there are three DLCIs configured for a Channel Group, the first DLCI may be configured with 
Primary and High priority, the second with Medium and Normal, and the third with Low.

The DLCI for the circuit.

The method used to create the DLCI. Possible methods include:

●

Local - The DLCI was created manually.

●

Unused - The DLCI was created using the LMI interface.

The operational status of the DLCI. Possible statuses include:

●

Active - The DLCI is active.

●

Inactive - The DLCI is inactive.

●

Deleted - The DLCI has been deleted.

●

Invalid - The DLCI is not valid.

The Frame Relay sub-interface associated with the DLCI.

When the Primary box is checked, the selected DLCI is the primary 
carrier of traffic for the interface.

Select the priority of traffic on the selected DLCI from the available 
check boxes. Possible priorities include:

●

●

●

●

The encapsulation method for the session. Possible encapsulation 
types are:

●

●

Frame Relay Non IETF