Avaya G250 Manual Do Utilizador

To delete a DLCI:

1. Click the DLCI you want to delete.

2. Click Delete. A confirmation dialog box opens.

3. Click Yes.

4. Click Apply. The DLCI is deleted.

The following table provides a list of the fields in the DLCIs tab of the USP dialog box and their 
descriptions:

To configure the priority of DLCI traffic, select the checkboxes for the priorities to use on the 
DLCI. 

If only one DLCI is configured for the USP, all traffic uses the DLCI. 

If more than one DLCI is configured on the USP, the priorities must be distributed among the 
DLCIs, and no priority can be configured for multiple DLCIs. For example, if there are three 
DLCIs configured for a USP, the first DLCI may be configured with Primary and High priority, 
the second with Medium and Normal, and the third with Low.

The DLCI for the circuit.

The method used to create the DLCI. Possible methods include:

●

Local - The DLCI was created manually.

●

Unused - The DLCI was created using the LMI interface.

The operational status of the DLCI. Possible statuses include:

●

Active - The DLCI is active.

●

Inactive - The DLCI is inactive.

●

Deleted - The DLCI has been deleted.

●

Invalid - The DLCI is not valid.

The Frame Relay sub-interface associated with the DLCI.

When the Primary box is checked, the selected DLCI is the primary carrier of 
traffic for the interface.

Select the priority of traffic on the selected DLCI from the available check 
boxes. Possible priorities include:

●

●

●

●

Encapsulation The encapsulation method for the session. Possible encapsulation types are:

●

●

Frame Relay Non IETF