Avaya CMC1 Manual Do Utilizador

Adding or Removing Hardware

248 Installation, Upgrades and Additions for Avaya CMC1 Media Gateways

3. Check the

Date

and

Timestamp

fields to determine whether to revert back to a previous

image.

In the following example, we are reverting back to Image 2, because it has the older date
and time stamp.

Note:

Note:

In most cases, the image with the more recent date and time stamp is the new
firmware image file.

4. Type set boot-image board UUCSS image 1 | 2 and press Enter.

Example: set boot-image board 1C07 image 2

The system responds with Command Successfully Completed.

5. Type get boot-image UUCSS and press Enter to check the status of the firmware images

on the target circuit pack.

Note that the values in the

Reboot

Image

field have changed.

Note:

Note:

If a TN799C/DP C-LAN or TN2305 VAL circuit pack, reseat them to activate the
new firmware image. Go to

get boot-image 1C07

DISPLAY FIRMWARE IMAGE(S)

Image 1 Image 2

Board Type: TN2501 TN2501

FW Vintage: 02 01

HW Signature: 02 02

Suffix: A A

Date: 03/02/02 03/02/01

Timestamp: 10:30:50 12:42:18

CRC Checksum: Good Good

Active Image: Yes No

Reboot Image: No Yes