Avaya G450 Manual Do Utilizador

The configured state of the Auto-Negotiation protocol between two 
stations. When enabled, Auto-Negotiation detects the highest 
common denominator for communication between endstations, and 
sets both to the same highest common setting. It also delivers remote 
link status.
For 10BaseT and 100BaseT ports, Auto-Negotiation determines the 
speed and Duplex Mode of communication between the endstations. 
For Gigabit ports, Auto-Negotiation determines the Flow Control 
setting of the ports.
For more information, refer to Auto-Negotiation in The Reference 
Guide.

The operational state of the Auto-Negotiation protocol between two 
stations. Possible statuses are: 

●

Pass - The Auto-Negotiation protocol is enabled and a common 
protocol has been established.

●

In Progress - The Auto-Negotiation protocol is in the process of 
detecting the communication capabilities of the endstations and 
setting them to the highest common denominator.

●

Fail - The Auto-Negotiation protocol was not able to detect the 
communication capabilities of the end station, or was unable to 
set them to the highest common denominator.

●

Disabled - The Auto-Negotiation protocol is disabled.

The state of communication of the selected port. Possible values are:

●

Full Duplex- The port can send and receive simultaneously.

●

Half Duplex - The port can either receive or send, but cannot 
do both simultaneously.

The rate of communication of the selected port. Possible values are:

●

●

●

The state of flow control on the selected port. 

The warning level of the selected port. Possible values are: 

●

●

●

A list of fault messages.