ONKYO TX-NR808 Manual Do Utilizador

En

With the Audio Adjust functions and settings, you can 
adjust the sound and listening modes as you like.

■

Multiplex
This setting determines which channel of a stereo multi-
plex source is output. Use it to select audio channels or 
languages with multiplex sources, multilingual TV 
broadcasts, and so on.

`

Main:

The main channel is output.

`

Sub:

The sub channel is output.

`

Main/Sub:

Both the main and sub channels are output.

■

Mono
This setting specifies the channel to be used for playing 
any 2-channel digital source such as Dolby Digital, or 
2-channel analog/PCM source in the Mono listening 
mode.

`

Left + Right:

Both the left and right channels are output.

`

Left:

Only the left channel is output.

`

Right:

Only the right channel is output.

`

Center:

Mono audio is output by the center speaker.

`

Left / Right:

Mono audio is output by the front left and right 
speakers.

This setting determines which speakers output mono 
audio when the Mono listening mode is selected.

• If  the  “Center” setting is set to “None” (

46), this setting is 

fixed at “Left / Right”.

■

PLIIx Music (2ch Input)
These settings apply to only 2-channel stereo sources.
If you’re not using any surround back speakers, these 
settings apply to Dolby Pro Logic II, not Dolby Pro 
Logic IIx.

`

On:

Panorama function on.

`

Off:

Panorama function off.

With this setting, you can broaden the width of the front 
stereo image when using the Dolby Pro Logic IIx Music 
listening mode.

`

–3 to 0 to +3

With this setting, you can move the sound field forward 
or backward when using the Dolby Pro Logic IIx Music 
listening mode. Higher settings move the sound field 
backward. Lower settings move it forward.
If the stereo image feels too wide, or there’s too much 
surround sound, move the sound field forward to 
improve the balance. Conversely, if the stereo image 
feels like it’s in mono, or there’s not enough surround 
sound, move it backward.

`

0 to 3 to 7

With this setting, you can adjust the width of the sound 
from the center speaker when using the Dolby Pro 
Logic IIx Music listening mode. Normally, if you’re 
using a center speaker, the center channel sound is out-
put by only the center speaker. (If you’re not using a 
center speaker, the center channel sound will be distrib-
uted to the front left and right speakers to create a phan-
tom center). This setting controls the front left, right, 
and center mix, allowing you to adjust the weight of the 
center channel sound.

■

PLIIz Height Gain
The Height Gain Control in Dolby Pro Logic IIz 
enables the listener to select how much gain is applied 
to the front high speakers. There are three settings, 
“Low”, “Mid” and “High”, and the front high speakers 
are accentuated in that order. While “Mid” is the default 
listening setting, the listener may adjust the Height Gain 
Control to their personal preference.

`

Low:

Low PLIIz Height Gain becomes active.

`

:

Medium PLIIz Height Gain becomes active.

`

High:

High PLIIz Height Gain becomes active.

• If the “Front High” settings is set to “None” (

46), this setting 

cannot be selected.

■

Dolby EX
This setting determines how Dolby EX encoded signals 
are handled. This setting is unavailable if no surround 
back speakers are connected. This setting is effective 
with Dolby Digital, Dolby Digital Plus and Dolby 
TrueHD only.

`

Auto:

If the source signal contains a Dolby EX flag, the 
Dolby EX or THX Surround EX listening mode is 
used.

`

Manual:

You can select any available listening mode.