Avaya X330W2-DS1 Manual Do Utilizador

Chapter 7

X330WAN CLI Commands

82

Avaya X330W-2DS1 User’s Guide

Use the ip routing command to enable IP routing. The no form of this 
command disables the IP routing process in the device. By default, IP routing is 
enabled.

The syntax for this command is:

Use the

 ip routing-mode command to set the IP routing mode of the interface. 

In RT-MGMT mode, the interface functions as a routing interface. In 
RT_PRIMARY_MGMT mode, the interface function as both a routing interface and 
the primary management interface. The IP address used in Avaya MultiService 
Network Manager is the primary management interface IP address. Only one 
interface can be in RT_PRIMARY_MGMT mode. By default, the first IP address 
defined is used as the primary. 

This command is executed from the Serial, Loopback, Fast Ethernet and 

Fabric Fast Ethernet interfaces.

The syntax for this command is:
ip routing-mode <mode>

The syntax for this command for the X330WAN is:
ip routing-mode <rt_primary_mgmt>

Example:

X330WAN-2DS1-1(configure)# 

ip routing-mode RT_PRIMARY_MGMT

Use the ip vrrp command to create a virtual router on the interface. Use the 

no 

form of this command to delete a virtual router.

This command is executed from the Fast Ethernet and Fabric Fast Ethernet 

interfaces.

mode

 RT_MGMT or RT_PRIMARY_MGMT mode