Avaya X330W2-DS1 Manual Do Utilizador

Chapter 7

X330WAN CLI Commands

86

Avaya X330W-2DS1 User’s Guide

The syntax for this command is:
[no] ip vrrp <vr-id> priority <pri-value>

Example:
To set the priority value for virtual router 1 to 10:

X330WAN-2DS1-1(configure)# ip vrrp 1 priority 10

Use the

 ip vrrp timer command to set the virtual router advertisement timer 

value (in seconds) for the virtual router ID. Use the no form of this command to 
restore the default value.

The syntax for this command is:
[no] ip vrrp <vr-id> timer <value>

Example:
To set the virtual router advertisement timer value for virtual router 3 to 2:

X330WAN-2DS1-1(configure)# ip vrrp 3 timer 2

Use the network command to enable OSPF in this network. The

 no form of this 

command disables the OSPF in this network. The default is disabled.

The syntax for this command is:

<net addr> [<wildcard-mask> [area <area id>]]

vr-id

Virtual Router ID (1-255)

pri-value

The priority value (1-254)

vr-id

Virtual Router ID (1-255)

value

The advertisement transmit time (seconds). The 
range is from 1 to 255.

net addr

IP address

wildcard-mask

Wildcard mask address

area id

Area ID. This parameter exists for compatibility with 
the P550.