Avaya X330W2-DS1 Manual Do Utilizador

Chapter 7

X330WAN CLI Commands

102

Avaya X330W-2DS1 User’s Guide

out

Use the ip access-list command to create a specific policy rule. This 
command defines a policy rule. The access list contains several of these rules. Each 
rule pertains to the source IP address, the destination IP address, the protocol, the 
protocol ports (tcp/udp if relevant), and to the ACK bit (in TCP protocol). To delete 
a specific rule, use the no form of this command.

The syntax for this command for the X330WAN is:

<policy-list-number> <access-list-index>     

                   <action> <protocol> {<source-ip> 

                 <source-wildcard>|any|host 

                        <source-ip>} [<operator> <port> [<port]]        

                   {<destination-ip> <destination-

                    wildcard>|any|host

                   <destination-ip>}[<operator> <port>

                   [<port>]][established] [precedence] 

access-list-number

An integer (100..149)

policy-list-number

An integer (100..149)

access-list-index

An integer (1...9999)

command

permit|deny|deny-and-notify|fwd0-7

action

permit|deny|deny-and-notify|fwd0-7| 
composite op name

protocol

ip|tcp|udp|integer (1..255)

source-ip

IP network

source-wildcard 

IP network wildcard

operator

eq|lt|gt|range

port An 

integer 

(1..65535)

destination-ip IP 

network

destination-wildcard

IP network wildcard

precedence

mandatory|optional