Avaya X330W2-DS1 Manual Do Utilizador

Policy CLI Commands

Avaya X330W-2DS1 User’s Guide

113

The syntax for this command is:

 <policy-list-number> <owner>

If you wish to define a name which includes spaces, you must enclose the 

entire name in quotation marks, e.g. "new york".

Example:
X330WAN-2DS1-1(configure)# ip distribution access-list-owner 

78 "admin"

Use the ip simulate command to check the policy for a simulated packet. The 
command contains the addressed list number, and the packet parameters.

This command can only be executed from inside the interface context, such as:  

the Serial, Loopback, Fast Ethernet and Fabric Fast Ethernet interfaces of the 
X330WAN.

The syntax for this command is:

 

<policy-list-number> <direction> [<priority>] 

[<dscp-value>]<source> <destination> [<protocol> [<source 
port> <destination port> [<established>]]]

policy-list-number

An integer (1..99)

owner

List owner

policy-list-number

An integer (100..199) where 0 is the default list.

direction

in|out

priority

fwd0|fwd1|..|fwd7

dspc value

dscp0|dscp1|..|dscp63

source

Source IP address

destination

Destination IP address

protocol

ip|tcp|udp|integer (1..255)