Avaya X330W2-DS1 Manual Do Utilizador

Chapter 7

X330WAN CLI Commands

124

Avaya X330W-2DS1 User’s Guide

If the user has an active ppp session over this channel-group, a warning is 

issued.

If a user issues this command with an existing channel-num, it is assumed 

that the timeslot-list is a list of timeslots that should replace the current list of 
timeslots already defined for that channel-group.

Channel groups, voice groups, and TDM groups all use group numbers. All 

group numbers configured for channel groups, voice groups, and TDM groups 
must be unique. For example, you cannot use the same group number for a channel 
group and a TDM group. 

Examples:

X330WAN-2DS1-1(config-controller:1)# channel-group 10 

timeslots 10-24

X330WAN-2DS1-1(config-controller:1)# channel-group 2 

timeslots 5-6,8,20-24

Use the clear fragment command to clear the fragment database and restore 
its defaults. 

No fragmentation will be done of packets in transit through the router.

The syntax for this command is:
clear fragment 

Use the clock source command to configure the clock source for an E1/ T1 
controller. Use the no form of this command to return the value to the default.