Avaya X330W2-DS1 Manual Do Utilizador
Layer 3 CLI Commands
Avaya X330W-2DS1 User’s Guide
69
Examples:
To enable relaying of BOOTP and DHCP requests:
To enable relaying of BOOTP and DHCP requests:
X330WAN-2DS1-1(configure)# ip bootp-dhcp relay
To disable relaying of bootp and dhcp requests:
X330WAN-2DS1-1(configure)# no ip bootp-dhcp relay
ip bootp-dhcp server (Interface context)
Use the
ip bootp-dhcp server command to add a bootp/dhcp server to
handle bootp/dhcp requests received by this interface. The
no form of this
command removes the server. A maximum of two servers can be added to a single
interface. Using the X330WAN, the no form of this command remove a bootp
server.
interface. Using the X330WAN, the no form of this command remove a bootp
server.
Note:
This command is executed from the Fast Ethernet and Fabric Fast Ethernet
interfaces.
The syntax for this command is:
[no] ip bootp-dhcp server <ip-address>
[no] ip bootp-dhcp server <ip-address>
Example:
To add station 192.168.37.46 as a bootp/dhcp server to handle bootp/dhcp requests
arriving at the interface “marketing”:
To add station 192.168.37.46 as a bootp/dhcp server to handle bootp/dhcp requests
arriving at the interface “marketing”:
X330WAN-2DS1-1(configure)# ip bootp-dhcp server 192.168.37.46
ip broadcast-address (Interface Context)
Use the ip broadcast-address command to update the interface broadcast
address. The Broadcast address must be filled in with 0s or 1s, for example,
10.255.255.255 or 10.0.0.0.
address. The Broadcast address must be filled in with 0s or 1s, for example,
10.255.255.255 or 10.0.0.0.
Note:
This command is executed from the Serial, Fast Ethernet and Fabric Fast
Ethernet interfaces.
ip-address
The IP address of the server