Avaya X330WAN Manual Do Utilizador

General: Device Commands

Avaya X330WAN User’s Guide

99

Use the

 set logout 

command to set the number of minutes until the system 

automatically disconnects an idle session.

 [timeout] 

To set the number of minutes until the system disconnects an idle session 
automatically:

X330WAN-2DS1-1(super)# set logout 20

Sessions will be automatically logged out after 20 minutes of idle 

time.

To disable the automatic disconnection of idle sessions:

X330WAN-2DS1-1(super)# set logout 0

Sessions will not be automatically logged out.

Use the

 set snmp trap 

commands to add an entry to the SNMP trap receiver table 

and to enable or disable the different SNMP traps for a specific receiver. First add 
the rcvr_addr and then enable/disable the different traps.

 <rcvr_addr>

<rcvr_addr> {enable|disable} {all|vlan_violation|...}

timeout

Number of minutes (0 to 999) until the system automatically 
disconnects an idle session. Setting the value to 0 disables the 
automatic disconnection of idle sessions (default is 15 minutes).

rcvr_addr

IP address of the system to receive SNMP traps.

enable

Activate SNMP traps.

disable

Deactivate SNMP traps.

all

(Optional) Specify all trap types.