Avaya X330WAN Manual Do Utilizador

General Layer 2 Interface CLI Commands

Avaya X330WAN User’s Guide

163

In rare cases, the sub-frame relay traffic information presented by this 

command can include packets that are eventually dropped before transmission.

Use the 

snmp trap link-status 

command to enable Link Up and Link Down 

traps. The 

no

 form of this command deactivates the traps for the interface. By 

default the link-status trap generation is disabled.

100Mb/s, 10Mb/s The Fast Ethernet speed.

Backup interface

Indicates if this interface is used as a backup interface for 
another.

Failure delay

The time in seconds between the Primary interface going down 
and the Backup interface activation.

Secondary disable 
delay

The time in seconds between the Primary interface restoration 
and the Backup interface deactivation.

LMI enq sent

The number of t391 status requests sent (Frame Relay interfaces 
only).

LMI stst recvd

The number of status messages received from the DCE (Frame 
Relay interfaces only).

LMI upd recvd

The number of LMI updates received from the DCE (Frame 
Relay interfaces only).

DTE LMI 
down/up

The status of the LMI. After the first message is received from 
the DCE, the status is up (Frame Relay interfaces only).

LMI DLCI

The DLCI used for the LMI messages (Frame Relay interfaces 
only).

LMI type

The LMI type (Frame Relay interfaces only).

Frame relay 
DTE/DCE

The module type (Frame Relay interfaces only).