Avaya X330WAN Manual Do Utilizador

Chapter 6

X330WAN CLI Commands

178

Avaya X330WAN User’s Guide

The possible values of direction are: 

To enable rebroadcasting of NETBIOS packets received by and sent from the 
FastEthernet interface:

X330WAN-2DS1-1(super-if:FastEthernet1)# ip netbios-rebroadcast both

Use the ip netmask-format command to specify the format of netmasks in the 

show

 command output. The

 no 

form of this command restores the format to the 

default, which is a dotted decimal format.

<mask-format>

The possible mask formats are:

To display netmasks in bitcount format:

X330WAN-2DS1-1(configure)# ip netmask-format bitcount

both

NETBIOS packets received on the interface are rebroadcast to other 
interfaces and NETBIOS packets received on other interfaces are 
rebroadcast to this interface.
If no parameter is provided in the command, the "both" option is 
applied as the default.

disable

NETBIOS packets are not rebroadcast in or out of this interface.

bitcount

Addresses are followed by a slash and the total number of bits in 
the netmask, such as 17.

decimal

The network masks are in dotted decimal notation, such as 
255.255.255.0.

hexadecimal

The network masks are in hexadecimal format as indicated by 
the leading 0X, such as 0XFFFFFF00.