Avaya X330WAN Manual Do Utilizador
Layer 3 CLI Commands
Avaya X330WAN User’s Guide
189
ip vrrp override addr owner
Use the ip vrrp override addr owner command to accept packets
addressed to the IP address(es) associated with the virtual router, such as ICMP,
SNMP, and TELNET (if it is not the IP address owner). The no form of this
command discards these packets.
addressed to the IP address(es) associated with the virtual router, such as ICMP,
SNMP, and TELNET (if it is not the IP address owner). The no form of this
command discards these packets.
Note:
This command is executed from the Fast Ethernet and FabricFastEthernet
interfaces.
Syntax
[no] ip vrrp
<vr-id> override addr owner
Parameters
Example
X330WAN-2DS1-1(configure)# ip vrrp 1 override addr owner
ip vrrp preempt
Use the ip vrrp preempt command to configure the router to preempt a lower
priority master for the virtual router ID. The no form of this command disables
preemption for the virtual router instance. By default, preemption is enabled.
priority master for the virtual router ID. The no form of this command disables
preemption for the virtual router instance. By default, preemption is enabled.
Note:
This command is executed from the Fast Ethernet and FabricFastEthernet
interfaces.
Syntax
[no] ip vrrp
<vr-id> preempt
Parameters
Example
X330WAN-2DS1-1(configure)# ip vrrp 1 preempt
vr-id
Virtual Router ID, an integer from 1 to 255.
vr-id
Virtual Router ID, an integer from 1 to 255.