Avaya X330WAN Manual Do Utilizador
Policy CLI Commands
Avaya X330WAN User’s Guide
219
Parameters
Example
X330WAN-2DS1-1(configure)# show ip access-group "FastEthernet 1" in
Note:
This command is available only when not in any context.
show ip access-list-dscp
Use the
show ip access-list-dscp
command to display the DSCP table of a given
Policy list.
Syntax
show ip access-list dscp
<policy-list-number> [<dscp>]
Parameters
Example
X330WAN-2DS1-1(configure)# show ip access-list-dscp 101 63
show ip access-lists
Use the
show ip access-lists
command to see all the current Policy lists.
Syntax
show ip access-lists
[<policy-list-number>]
Parameters
Example
X330WAN-2DS1-1(configure)# show ip access-lists
ip access-list 100 10 deny-and-notify tcp
interface name
The name of the interface, a string (e.g., ”FastEthernet 0").
directions
in | out
policy-list-number
The Policy list number, an integer from 100 to 149, where
0 is the default list.
0 is the default list.
dscp
DSCP entry, an integer from 0 to 63.
policy-list-number
The Policy list number, an integer from 100 to 149, where
0 is the default list.
0 is the default list.