Avaya X330WAN Manual Do Utilizador

Configuring the X330WAN

Avaya X330WAN User’s Guide

27

•

v  =  VLAN  number

After configuring the new interface, you can perform the following tests to verify 
that the new interface is operating correctly.
•

For the X330-2DS1, use the 

 

<port> 

command to display the 

status of the controller for E1/T1 interfaces.

•

Use  the 

<type> <identifier> 

command to display 

information on all interfaces: Fast Ethernet, FabricFast Ethernet, Serial, Console, 
and Loopback. Verify that the output information is correct.

•

Use  the 

[<interface-name>|<dlci number>] 

command to display the Frame Relay interface configuration.

•

Use  the 

 [<interface-name>|

<IP interface>|<ip-address>] 

command to display IP interface 

configured Serial and Ethernet ports.

•

Use  the 

command to display the configuration running 

on the switch.

•

Use  the 

command to display the configuration loaded 

at startup.

•

Use  the 

 

<host> [<interval> [<size>]] 

command to send ICMP echo 

request packets to another node on the network. Each node is periodically 
pinged and checked if an answer was received. This checks host reachability 
and network connectivity.

Serial

interface serial x

interface serial x

Sub Frame Relay

N/A

interface serial x.z point-to-

point

IP

interface serial x.w

interface serial x.z.w

FastEthernet

interface fastethernet 1.w

interface fastethernet 1.w

FabricFastEthernet

interface fabricfastethernet 

1:v.w

interface fabricfastethernet 

1:v.w