Avaya X330WAN Manual Do Utilizador

Página de 264
VoIP Implementation with a G700 Media Gateway and an S8300 Media Server
Avaya X330WAN User’s Guide
59
In Figure 4.10, Site A contains four IP phones and a data LAN connected via a 
P333T-PWR switch to a S8300 Media Server. The S8300 Media Server houses a 
X330W-2USP expansion module that is connected to the WAN via a 128Kbps V.35 
interface. Following are the connection details for Site A:
The IP phones are configured with the following DSCP tagging: 
— Voice  =  DSCP  46
— Voice control = DSCP 34
Note:  
The Policy list in the next configuration is based on the assumption that the 
Media Gateway, Media Server, and the IP phones send VoIP control packets with a 
DSCP value of 34 and voice with a DSCP value of 46. If any of the components of the 
topology are sending control or voice packets with other DSCP values, you must 
make changes in the Policy list.
The S8300 Media Server default RTP UDP port range is 2048 to 3028.
Network IPs (all 24 mask):
— IP phones - 1.1.1.0 (VLAN 1)
— Data - 11.11.11.0 (VLAN 2)
— Serial - 2.2.2.1
— Gatekeeper - 149.49.54.81
— MGP - 149.49.54.82
— VoIP (MGP) - 149.49.54.83
Site B contains four IP phones and a data LAN connected to a P333T-PWR switch in 
a stack with a G700 Media Gateway. The G700 Media Gateway houses a 
X330W-2DS1 expansion module that is connected to the WAN via a two-timeslot 
(128Kbps) T1 interface. Following are the connection details for Site B:
IP phone are configured with DSCP tagging:
— Voice  =  DSCP  46
— Voice control = DSCP 34
The G700 Media Gateway default RTP UDP port range is 2048 to 3028.
Network IPs (all 24 mask):
— IP phones - 3.3.3.0 (VLAN 1)
— Data - 33.33.33.0 (VLAN 2)
— Serial - 2.2.2.2
— MGP - 4.4.4.10
— VoIP (MGP) - 4.4.4.11