Avaya X330WAN Manual Do Utilizador

Chapter 4

Operational Concepts and Configuration Examples

74

Avaya X330WAN User’s Guide

•

Network  IPs:
— IP phones - 10.200.231.0 24 (VLAN 1)
— Serial - 192.168.2.6 30
— DHCP Server - 10.200.231.251

Site B contains IP phones connected to a P333T-PWR switch. The P333T-PWR 
switch houses a X330W-2DS1 expansion module that is connected to the WAN via a 
24 timeslot (1.536 Mbps) T1 interface. A DEFINITY Gateway is connected to the 
P333T-PWR via the LAN. Following are the connection details for Site B:
•

IP phone are configured with DSCP tagging:
— Voice = DSCP 46
— Voice control = DSCP 34

•

The CLAN in the DEFINITY has a default RTP UDP port range is 2048 to 3028.

•

Network  IPs:
— IP phones - 149.49.47.0 24 (VLAN 1)
— Serial - 192.168.2.5 30
— CLAN - 149.49.47.3
— Prowler - 149.49.47.4

Configuration Example for Site A

The following is the configuration procedure for the X330WAN-2DS1, as shown in 
Figure 4.12. Commands with footnotes are described at the end of the configuration 
procedure.
•

Loopback and PMI interfaces configuration:

X330WAN-2DS1-1(super)# interface Loopback 1

X330WAN-2DS1-1(super-if:Loopback1)# ip address 10.10.10.10 24

The Primary management interface has changed. Please copy the running

configuration to the start-up configuration file, and reset the 

device.

X330WAN-2DS1-1(super-if:Loopback1)# exit

X330WAN-2DS1-1(super)# copy running-config startup-config

X330WAN-2DS1-1(super)# reset

•

FabricFastEthernet interface configuration:

X330WAN-2DS1-1(super)# interface FabricFastEthernet 1:1

X330WAN-2DS1-1(super-subif:FabricFastEthernet1:1.1)# ip address 

X330WAN-2DS1-1(super-if:FabricFastEthernet1:1.1)# exit

•

Configuration of a Policy list with the appropriate DSCP-CoS mappings:

X330WAN-2DS1-1(super)# set qos policy-source local

X330WAN-2DS1-1(super)# ip access-list-name 100 voice

X330WAN-2DS1-1(super)# ip access-list-dscp operation 100 34 fwd7

(1)

X330WAN-2DS1-1(super)# ip access-list-dscp operation 100 46 fwd6

 (2)