Avaya X330WAN Manual Do Utilizador
![Avaya](https://files.manualsbrain.com/attachments/539de53b12b0cfce0bb8cf1e3bb961e969d9f556/common/fit/150/50/0bfb423b07b431ecf5ac095ccde7771f5eac50e962dfba59f8e256280b3d/brand_logo.png)
Layer 3 CLI Commands
Avaya X330WAN User’s Guide
183
ip rip authentication mode (Interface context)
Use the ip rip authentication mode command to specify the type of
authentication used in RIP Version 2 packets. The no form of this command restores
the default value of none.
authentication used in RIP Version 2 packets. The no form of this command restores
the default value of none.
Note:
This command is executed from the Serial, Loopback, Fast Ethernet, and
FabricFastEthernet interfaces.
Syntax
[no] ip rip authentication mode
[simple|none]
Parameters
Example
X330WAN-2DS1-1(configure)# ip rip authentication mode simple
ip rip default-route-mode (Interface context)
Use the ip rip default-route-mode command to enable learning of the
default route received by the RIP protocol. The default state is talk-listen. The
default route received by the RIP protocol. The default state is talk-listen. The
no
form of the command disables listening to default routes.
Note:
This command is executed from the Serial, Loopback, Fast Ethernet, and
FabricFastEthernet interfaces.
Syntax
[no] ip rip default-route-mode
<mode>
Parameters
The possible default route modes on an interface are:
Example
X330WAN-2DS1-1(configure)# ip rip default-route-mode talk-only
simple|none
The authentication type used in RIP Version 2 packets:
• simple - Clear text authentication.
• none - No authentication.
• simple - Clear text authentication.
• none - No authentication.
talk-listen
Set RIP to send and receive default route updates on the interface.
talk-only
Set RIP to send but not receive default route updates on the interface.