Avaya X330WAN Manual Do Utilizador
![Avaya](https://files.manualsbrain.com/attachments/539de53b12b0cfce0bb8cf1e3bb961e969d9f556/common/fit/150/50/0bfb423b07b431ecf5ac095ccde7771f5eac50e962dfba59f8e256280b3d/brand_logo.png)
Layer 3 CLI Commands
Avaya X330WAN User’s Guide
185
ip rip send-receive (Interface context)
Use the ip rip send-receive command to set the RIP send and receive modes
on an interface. The default state is talk-listen. The no form of this command sets the
RIP to talk (i.e., send report).
on an interface. The default state is talk-listen. The no form of this command sets the
RIP to talk (i.e., send report).
Syntax
[no] ip rip send-receive-mode
<mode>[<default route metric>]
Parameters
Example
X330WAN-2DS1-1(super-if:Serial:1:1)# ip rip send-receive talk-listen
ip rip split-horizon (Interface context)
Use the
ip rip split-horizon
command to enable the split-horizon mechanism.
The
no
form of this command disables the split-horizon mechanism. By default
split-horizon is enabled.
The split-horizon mechanism prevents information about routes from exiting the
router interface through which the information was received. This prevents routing
loops.
The split-horizon mechanism prevents information about routes from exiting the
router interface through which the information was received. This prevents routing
loops.
Note:
This command is executed from the Serial, Loopback, Fast Ethernet, and
FabricFastEthernet interfaces.
Syntax
[no] ip rip split-horizon
Example
X330WAN-2DS1-1(super-if:Serial:1:1)# no ip rip split-horizon
mode
talk-listen
-
Sets RIP to receive and transmit updates on the
interface.
talkdefault-listen
-
Sets RIP to receive updates on the
interface and send only a default route.
listen-only
-
Sets RIP to receive updates on the interface and
not transmit them.
default route
metric
Integer value.