Cabletron Systems 250 Manual Do Utilizador
7
♦
Instructions to Install the SmartSwitch™ Router 250
Hardware:
1.
Ensure that the Power Switch on the router is OFF. Connect the
router to the AC power source using the power cable.
router to the AC power source using the power cable.
2.
Connect the router to the computer workstation’s Ethernet card
using the crossover cable labeled "Ethernet 10Base-T,
Crossover" (RJ-45 connector). If you are connecting to a hub,
use a standard 10Base-T straight-through cable (not provided).
using the crossover cable labeled "Ethernet 10Base-T,
Crossover" (RJ-45 connector). If you are connecting to a hub,
use a standard 10Base-T straight-through cable (not provided).
3.
Connect the router to the ADSL line using the cable labeled
"ADSL or ISDN" (connect the RJ-45 connector to the router’s
ADSL R-DMT port and the other end of the cable to the
Telephone Jack).
"ADSL or ISDN" (connect the RJ-45 connector to the router’s
ADSL R-DMT port and the other end of the cable to the
Telephone Jack).
4.
Switch the router Power Switch ON.
HARDWARE INSTALLATION