Broadband Products xDSL/Cable Manual Do Utilizador

 

 

 
You can configure your wireless router by a host PC in one of the following three ways. 

 

Web browser via a local LAN 

 

Command Line Interface via a telnet client 

1. Click the Start Button, and select Settings 
2. Click the Control Panel. The Win95/98/Me Control Panel will appear 
3.  Open the Network setup window by double-clicking the Network icon 
4.  Check your list of Network items. If TCP/IP is already installed, proceed to step 5. Other-

wise (You may need your Windows CD to complete the installation of TCP/IP): 

Click the ADD button 

In the Network Component Type dialog box, select Protocol 

In the Select Network Protocol dialog box, select Microsoft 

In the Network Protocols area of the same dialog box, select TCP/IP and 

click OK 

5.  With TCP/IP installed, select TCP/IP from the list of Network Components 
6.  In the TCP/IP window, check each of the tabs and verify the following settings: 

Bindings: Select Client for Microsoft Networks and Files and printer sharing for 

Microsoft Networks 

Gateway: All fields are blank 
DNS Configuration: Select Disable DNS 
WINS Configuration: Select Use DHCP for WINS Resolution 
IP address: Select the Obtain IP address automatically radio button 

7.  Reboot the PC 
 

1. Click the Start button, and choose Control Panel (in Classic View) 
2.  In the Control Panel, double-click Network Connections 
3. Double-click Local Area Connection 
4.  In the LAN Area Connection Status window, select Internet Protocol (TCP/IP) and click 

Properties 

5. Select the Obtain an IP address automatically and the Obtain DNS server address 

automatically radio buttons 

6.  Click OK to finish the configuration