ZyXEL Communications nbg-418n Manual Do Utilizador
Chapter 3 Connection Wizard
NBG-418N User’s Guide
26
The following table describes the labels in this screen,
3.4.1 Ethernet Connection
Choose Ethernet when the WAN port is used as a regular Ethernet. Continue to
Figure 13
Wizard Step 3: Ethernet Connection
3.4.2 PPPoE Connection
Point-to-Point Protocol over Ethernet (PPPoE) functions as a dial-up connection. PPPoE is an IETF
(Internet Engineering Task Force) standard specifying how a host personal computer interacts with
a broadband modem (for example DSL, cable, wireless, etc.) to achieve access to high-speed data
networks.
(Internet Engineering Task Force) standard specifying how a host personal computer interacts with
a broadband modem (for example DSL, cable, wireless, etc.) to achieve access to high-speed data
networks.
For the service provider, PPPoE offers an access and authentication method that works with existing
access control systems (for instance, RADIUS).
access control systems (for instance, RADIUS).
One of the benefits of PPPoE is the ability to let end users access one of multiple network services,
a function known as dynamic service selection. This enables the service provider to easily create
and offer new IP services for specific users.
a function known as dynamic service selection. This enables the service provider to easily create
and offer new IP services for specific users.
Operationally, PPPoE saves significant effort for both the subscriber and the ISP/carrier, as it
requires no specific configuration of the broadband modem at the subscriber’s site.
requires no specific configuration of the broadband modem at the subscriber’s site.
By implementing PPPoE directly on the NBG-418N (rather than individual computers), the
computers on the LAN do not need PPPoE software installed, since the NBG-418N does that part of
the task. Furthermore, with NAT, all of the LAN's computers will have Internet access.
computers on the LAN do not need PPPoE software installed, since the NBG-418N does that part of
the task. Furthermore, with NAT, all of the LAN's computers will have Internet access.
Table 6
Wizard Step 3: ISP Parameters
CONNECTION TYPE
DESCRIPTION
Ethernet
Select the Ethernet option when the WAN port is used as a regular Ethernet.
PPPoE
Select the PPP over Ethernet option for a dial-up connection. If your ISP gave
you an IP address and/or subnet mask, then select PPTP.
you an IP address and/or subnet mask, then select PPTP.
PPTP
Select the PPTP option for a dial-up connection.