ZyXEL Communications NBG-417N Manual Do Utilizador
Chapter 5 AP Mode
NBG-417N User’s Guide
54
5.4.2 WLAN and Maintenance Settings
The configuration of wireless and maintenance settings in AP Mode is the same as for Router
Mode.
Mode.
for information on the configuring your wireless network.
and
for
information on configuring your maintenance settings.
5.5 Logging in to the Web Configurator in AP Mode
1
Connect your computer to the LAN port of the NBG-417N.
2
The default IP address of the NBG-417N is “192.168.1.2”. In this case, your computer must have an
IP address in the range between “192.168.1.3” and “192.168.1.254”.
IP address in the range between “192.168.1.3” and “192.168.1.254”.
3
Click Start > Run on your computer in Windows.
4
Type “cmd” in the dialog box.
5
Type “ipconfig” to show your computer’s IP address. If your computer’s IP address is not in the
correct range then see
correct range then see
for information on changing your computer’s IP
address.
6
After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and
type “192.168.1.2” as the web address in your web browser.
type “192.168.1.2” as the web address in your web browser.
See
for a tutorial on setting up a network with an AP.
IP Subnet
Mask
Mask
The subnet mask specifies the network number portion of an IP address. Your NBG-
417N will automatically calculate the subnet mask based on the IP address that you
assign. Unless you are implementing subnetting, use the subnet mask computed
by the NBG-417N.
417N will automatically calculate the subnet mask based on the IP address that you
assign. Unless you are implementing subnetting, use the subnet mask computed
by the NBG-417N.
Apply
Click Apply to save your changes to the NBG-417N.
Reset
Click Reset to reload the previous configuration for this screen.
LABEL
DESCRIPTION